Pendeteksi oli rem + penguji tekanan ban, penguji tekanan ban dua dalam satu tekanan oli rem

Brake Fluid And Tire Pressure 2in1 Tester 制动液 轮胎压力 二合一测试笔

     Thank you very much for choosing the brake fluidand tire pressure tester. It is a highly accurate,easy to use, very beautiful product.
     The tester is a new high-tech product that combines automotive brake fluid testing and tire pressure testing. Users can regularly check the water content of the brake fluid of the car, making driving safer and more worry-free Using the right tire pressure can give you greater safery, longer tire life and better fuel consumption, and hope it will protect your safe driving.

Enter tire pressure test

1.Press the key to start testing the tire pressure. The pressure nozzle is pressed against the tire valve,The measurement results appear on the LCD display.

2. Read the tire pressure directly on the display.
3. Press the  button continuously to convert the measurement unit.
4. Press and hold the  button for 3 seconds to turn off or Press the  button to close.

Enter brake fluid test

1.Press the  button to light up the green light and start testing the moisture content of the brake fluid. Open the bottom cover of the product and immerse the metal probe in the brake fluid. Within 1-2 seconds,the test results will be displayed correctly.
2.Automatically shut down after 7 seconds of testing.

Indicator description

Green light: Battery OK, the water content in the brake fluid is 0%
Yellow light: The water content in the brake fluid is <2%, which means that the brake fluid can continue to be used for 6 months, and then tested again after 6 months.
Red light: The water content in the brake fluid is >3%, indicating that the brake fluid cannot be used any more and needs to be replaced immediately.

Attention

1.When measuring tire pressure, the display shows OL,indicating that the test pressure range is exceeded.Press the nozzle firmly while testing, otherwise it will deflate.
2.Press the  or  keys. The display shows LO,indicating that the battery is low and needs to be replaced.
3.After testing the moisture content of the brake fluid, clean the metal probe with water to prevent corrosion of the brake fluid.
4.Battery: CR1225 or CR1220

      非常感谢您选择制动液和轮胎压力测试仪这个商品。它是一个高度精准、使用非常便捷、外观非常精巧的产品。
      该测试仪是汽车制动液检测和轮胎压力测试二合一的全新高科技产品，用户定期的检测汽车制动液的含水量可以让您在行车中更安全更放心，正确的轮胎压力也可以提供更高的安全性，更长的轮胎寿命和更好的燃油消耗。希望它能为您的安全行驶保驾护航。

进入轮胎压力测试

1、按下键开始测试轮胎压力，LCD显示屏上出现计量单位就可以对准气门嘴用力按下
测试压力。
2、在显示屏上直接读取轮胎压力即可。
3、连续按下键可以转换测量单位

4、长按键三秒则关机或按键关机。

进入制动液测试

1、按下键绿灯亮起，开始测试制动液含水量，打开产品底盖将金属探头浸入制动液中1-2秒，检测结果将正确的显示出来。
2、测试完毕7秒之后自动关机。

指示灯说明

绿灯：电池OK 即制动液中含水量0%
黄灯：制动液中含水量<2%，表示制动液可以继续使用6个月，6个月之后再检测一次
红灯：制动液中含水量>3%，表示制动液不能继续使用，需要立即更换。

注意

1、测量轮胎压力时，显示屏显示OL表示超出测试压力范围。检测时需按紧气门嘴，否则会放气。
2、按键或者键，显示屏显示LO则表示电池电量不足，需要更换电池。
3、测试完制动液含水量，请用水清洗金属探头，以防止制动液的腐蚀。
4、产品所用电池型号：CR1225或者CR1220